AEG FFE72731PM Скачать руководство пользователя страница 14

5.

Close the appliance door to start the

programme.

Starting a programme with

delay start

1.

Set a programme.

2.

Press 

 repeatedly until the display

shows the desired delay time (from 1

to 24 hours).

The indicator 

 is on.

3.

Close the appliance door to start the

countdown.

During the countdown, it is possible to

increase the delay time but not to

change the programme and options.
When the countdown is completed, the

programme starts.

Opening the door while the

appliance operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the

door, the appliance continues from the

point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme ends. It

does not happen if the door

is opened by AirDry

function.

Cancelling the delay start while

the countdown operates

When you cancel the delay start you

have to set the programme and options

again.

Press and hold simultaneously 

 and

 until the appliance is in programme

selection mode.

Cancelling the programme

Press and hold simultaneously 

 and

 until the appliance is in programme

selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is complete, the

display shows 0:00.
All buttons are inactive except for the

on/off button.

1.

Press the on/off button or wait for

the Auto Off function to

automatically deactivate the

appliance.

If you open the door before the

activation of Auto Off, the appliance

is automatically deactivated.

2.

Close the water tap.

10. 

HINTS AND TIPS

10.1 

General

Follow the hints below to ensure optimal

cleaning and drying results in daily use

and to help you protect the environment.
• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand.

When needed, select a programme

with a prewash phase.

• Always use the whole space of the

baskets.

• Make sure that items in the baskets

do not touch or cover each other.

Only then can the water completely

reach and wash the dishes.

• You can use dishwasher detergent

and rinse aid separately or you can

use the multi-tablets. Follow the

instructions on the packaging.

• Select a programme according to the

type of load and the degree of soil.

 offers the most efficient use of

water and energy consumption for

crockery and cutlery with normal soil.

www.aeg.com

14

Содержание FFE72731PM





























Отзывы: