5.1
Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
11.5
0.86
160
7.0 - 14
0.6 - 1.4
40 - 150
13.5 - 14.5
1.4 - 1.6
150 - 164
13 - 13.5
0.7 - 0.9
60 - 70
9.5 - 10
0.9 - 1.0
55 - 65
9
0.8
30
9.0 - 10.5
1.0 - 1.2
210 - 220
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2
Information for test
institutes
For all the necessary information for test
performance, send an email to:
Write down the product number (PNC)
that is on the rating plate.
6.
SETTINGS
6.1
Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of rinse aid according to the
required dosage.
These settings will be saved until you
change them again.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
is on and the display shows the
programme duration.
When you activate the appliance, usually
it is in programme selection mode.
However, if this does not happen, you
can set the programme selection mode
in the following way:
Press and hold simultaneously
Delay
and
Option
until the appliance is in
programme selection mode.
6.2
The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser
and no rinse aid will be released.
Factory setting: level 4.
ENGLISH
9