12.1
The washing and drying results are not satisfactory
Problem
Possible solution
There are whitish streaks or
bluish layers on glasses and
dishes.
• The release quantity of rinse aid is too much. Adjust
the rinse aid selector to a lower position.
• The quantity of detergent is too much.
There are stains and dry water
drops on glasses and dishes.
• The released quantity of rinse aid is not sufficient. Ad-
just the rinse aid selector to a higher position.
• The quality of the rinse aid can be the cause.
The dishes are wet.
• The programme does not have a drying phase or has
a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a
different brand or activate the rinse aid dispenser and
use rinse aid and multi-tablets together.
Refer to "
Hints and tips
" for
other possible causes.
13.
TECHNICAL INFORMATION
Dimensions
Width / Height / Depth
(mm)
596 / 818-898 / 575
Electrical connection
1)
Voltage (V)
220-240
Frequency (Hz)
50
Water supply pressure
Min. / Max. bar (MPa)
0.5 (0.05) / 8 (0.8)
Capacity
Place settings
13
Power consumption
Left-on mode (W)
0.99
Power consumption
Off-mode (W)
0.10
1)
Refer to the rating plate for other values.
14.
ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol
.
Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
marked with the symbol with the
household waste. Return the product to
your local recycling facility or contact
your municipal office.
www.aeg.com
36
Downloaded from www.vandenborre.be
