AEG DK 5690-3360, Инструкции по эксплуатации и монтажу, Страница: 9 / 24

69
In the case of abnormal operation, calibration can be carried out
manually :
Manual calibration
Carry out manual calibration in the following cases:
When the hood is installed for the first time.
When power is cut off for many hours or days (e.g. during
prolonged holidays).
When a very rapid change in temperature and/or humidity in the
kitchen takes place.
Carry out calibration with the hob off, at normal ambient tempera-
ture and in the absence of an appreciable amount of steam:
- press push button A and set the hood OFF ( A key OFF)
- press push buttons A and D simultaneously for 3 secs. The
hood emits a sound signal to indicate calibration taking place.
Sensors test
When functioning in automatic , the system continuously tests the
efficiency of the sensors . In case of damage, it signals the fault,
making the D push button flash the word “ SENSOR ”. Contact
technical assistance.
In this situation the hood can, in any case, be used in the manual
mode .
Safety procedure
Self-activation of automatic SAFETY functioning in particular
conditions : if the sensors reveal an excessive increase in
temperature , even if the hood is in manual functioning mode,
the system self selects automatic functioning and the extraction
motor starts. The hood can be turned off by pressing push button A .
H - Light ON/OFF
Should the hood or the controls fail to operate: disconnect the power
supply for at least 5 seconds, then turn the hood back on again.
All manuals and user guides at all-guides.com