5
INSTALLATION
Fastening the fasteners
Fasten the fasteners by turning the screw clock-wise.
Fixing the flue pipe
IMPORTANT!
If using a flexible duct, always install duct with the
wire helix pulled taut to minimise pressure and noise
Ducting accessories
Fix a Ø 150mm, non-combustible, rigid flue pipe to the
exhaust transition duct using cable ties or duct tape.
Fixing a Ø 120mm flue pipe
Fix the Ø150mm to 120mm converter to the rangehood
first, then fix a Ø125mm noncombustible flue pipe to the
exhaust transition duct using cable ties or duct tape.
roof cowl
AR150RC
(AR125RC)
rigid flue pipe
AR150F
(AR125F)
flexible duct
AR150FD
(AR125FD)
flue joiner
AR125FJD
with damper
wall vent kit
AR150WV
(AR125WV)
bend
AR150FD
(AR125B)
AR610CF
For best performance Ø 150mm ducting is recommended
(Ø 125mm ducting can be used, but will reduce the
airflow of the rangehood).
Accessories can be bought from your local appliance
retailer, or in Australia at our online spare parts and
accessories store: shop.electrolux.com.au
AR150WV
(AR125WV)
Ducted recirculating installation
Optional carbon filters(
AR610CF)
diminish cooking odours in
the recirculated air. Depending on the frequency of use and
the type of cooking, the expected life of carbon filters is
3 months. Using carbon filters will reduce the airflow of
the rangehood.
Please install the carbon filters as following picture shows.
For DGE3650HB, turn the carbon filters clockwise,
For DGE3950HB, turn the carbon filters anti-clockwise.
Warning:
Do not over
tighten screws or fascia
panel will deform.
* Using 120mm reducer will decrease airflow of the hood
.