AEG CCB6760ACM, Руководство пользователя

Страница: 11 / 36

2. Let the oven operate for 1 hour.
3. Set the function . Set the
temperature to 250ºC.
4. Let the oven operate for 15 minutes.
5. Turn off the oven and let it cool
down.
Accessories can become hotter than
usual. The oven can emit an odour and
smoke. Make sure that the airflow in the
room is sufficient.
6. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Heat setting
Symbols Function
Off position
Double zone
1 - 9 Heat settings
Use the residual heat to
decrease energy
consumption. Deactivate the
cooking zone approximately
5 - 10 minutes before the
cooking process is
completed.
Turn the knob for the selected cooking
zone to a necessary heat setting.
To complete the cooking process, turn
the knob to the off position.
6.2 Activating and
deactivating the outer rings
You can adjust the surface you cook to
the dimension of the cookware.
To activate the outer ring: turn the
knob clockwise through a light resistance
to . Then turn the knob
counterclockwise to the correct heat
setting.
To deactivate the outer ring: turn the
knob to the off position. The indicator
goes out.
6.3 Residual heat indicator
WARNING!
As long as the indicator is
on, there is a risk of burns
from residual heat.
The indicator appears when a cooking
zone is hot, but it does not function if
mains power is disconnected.
The indicator may also appear:
• for the neighbouring cooking zones
even if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the
cooking zone has cooled down.
7. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
7.1 Cookware
The cooking results depend on the
cookware material
• recommended: aluminium, copper
• not recommended: stainless steel,
cast iron, glass
The bottom of the cookware
must be as thick and flat as
possible.
Ensure pan bases are clean
and dry before placing on
the hob surface.
ENGLISH 11