Symbol
Function
Calculation
The appliance calculates the time for
cooking.
Heat-up Indicator
The display shows the temperature in
the appliance.
Fast Heat Up Indicator
The function is active. It decreases the
heat up time.
Weight Automatic
The display shows that the automatic
weight system is active or that weight
can be changed.
Heat + Hold
The function is active.
5.
BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1
Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and
cleaning" chapter.
Clean the appliance and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2
First Connection
When you connect the appliance to the
mains or after the power cut, you have to
set the language, the display contrast,
the display brightness and the time of
the day.
1.
Use the shuttle to set the values.
2.
Press
to confirm.
5.3
Calibration
For the best results with the function:
Auto Cooking, you must calibrate the
appliance. The calibration time is 4
hours.
If you use manual cooking
only, you can ignore this
procedure.
Conditions:
• The temperature in the kitchen must
be below 35 °C.
• Install the appliance in its permanent
location.
• Connect the appliance to the mains
supply and do not disconnect it again.
• If you change the appliance location
or electrical connection, you must do
the steps again.
Calibration:
1.
Activate the appliance.
2.
Select the menu: Basic Settings and
press OK.
3.
Select the function: Calibration and
press OK.
When you calibrate for the
first time, to start the
procedure you can set the
category from the control
panel or select the function
from the main menu: Auto
Cooking.
CAUTION!
Make sure that the
appliance is cool before you
use it.
www.aeg.com
10
Содержание BY931460KM
Страница 1: ...EN User Manual Oven BY931460KM ...
Страница 47: ...ENGLISH 47 ...
Страница 48: ...www aeg com shop 867326858 B 072017 ...