AEG ATB81011NX, Руководство пользователя

Страница: 9 / 16

1. Clean the inside and accessories with
lukewarm water and some neutral
soap.
2. Regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser
and the compressor at the back of
the appliance with a brush.
This operation will improve the
performance of the appliance and
save electricity consumption.
6.4 Defrosting
Your appliance is frost free. This means
that there is no build up of frost when it
is in operation, neither on the internal
walls nor on the foods.
The absence of frost is due to the
continuous circulation of cold air inside
the compartment, driven by an
automatically controlled fan.
6.5 No-Frost technology
In order to facilitate the removal of the
ice layer, the evaporator is assisted by
electric heating during the defrosting
procedure. The ventilator is in OFF
position. The defrost water will drip in
the tray placed at the compressor and
will evaporate. In the course of the
defrosting procedure (approx. 30
minutes) the evaporator becomes warm
but it has no influence on the internal
temperature.
The foods should be kept well-packed in
order to avoid any moisture loss as a
result of air circulation.
Do not obstruct the vent holes.
It is recommended to put all foods in the
baskets in the freezer compartment.
6.6 Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1. Disconnect the appliance from
electricity supply.
2. Remove all food.
3. Clean the appliance and all
accessories.
4.
Leave the door/doors open to
prevent unpleasant smells.
WARNING!
If you want to keep the
appliance switched on, ask
somebody to check it once
in a while to prevent the
food inside from spoiling in
case of a power failure.
7. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
7.1
What to do if...
Problem Possible cause Solution
The appliance does not op-
erate. The appliance is switched
off. Switch on the appliance.
The mains plug is not con-
nected to the mains socket
correctly. Connect the mains plug to
the mains socket correctly.
There is no voltage in the
mains socket. Connect a different electrical
appliance to the mains sock-
et. Contact a qualified elec-
trician.
ENGLISH 9