AEG 7332543566303, Руководство пользователя

Страница: 27 / 52

11. SETTINGS
11.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
touch the Manchas/Pre-Lav. and the
Centrif. buttons simultaneously until
the indicator comes on/goes off
on the display.
You can activate this option:
• After you touch the Inicio/Pausa
button: all the buttons and the
programme dial are deactivated
(except On/Off button ).
• Before you touch the Inicio/Pausa
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
11.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals when the programme is
completed, touch the Manchas/Pre-Lav.
and the Inicio diferido buttons
simultaneously for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
11.3 Permanent Extra Rinse
With this option you can permanently
have one or two extra rinses when you
set a new programme.
• Simultaneously touch the Temp.
button and the Centrif. button once to
add one extra rinse. appears on
the display.
• Simultaneously touch the Temp.
button and the Centrif. button twice to
add two extra rinses. appears on
the display.
• Simultaneously touch the Temp.
button and the Centrif. button three
times to remove extra rinses. The
display only shows
.
12. DAILY USE - WASHING ONLY
WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
The indicator of the Inicio/Pausa
button starts flashing.
The programme dial is automatically set
on default programme and only the
indicator Lavar is on above the Lavar +
Secar button.
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the cycle
duration.
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
ENGLISH 27