AEA TRP3, Руководство пользователя

Страница: 11 / 12

SPECIFICATIONS
Max Gain at 1kHz:
EIN (Max Gain 22 Hz to 22 kH
z):
Frequency Response:
THD+N:
XLR Output Maximum Level:
Input Impedance:
Input Impedance (P48 Engaged):
Output Impedance:
Max Input Signal Level:
Mic Gain Control:
Output Trim:
High Pass Filter:
Input and Output XLR Polarity:
LED Signal Level Indicators:
Dimensions:
Weight:
Power Supply Weight:
Power Supply Length:
85 dB
130 dBu (typical), 40 Ω source unweighted
128 dBu (typical), 150 Ω source unweighted
30 dB gain: (-0.5 dB from <10 Hz to 200 kHz)
85 dB gain: (-3 dB 9Hz to >200 kHz)
0.0015% (1 kHz, 22 Hz-22 kHz @30 dB Gain
+4 dBu output)
+27 dBu into 600 Ω load
68 k Ω
11.3 k Ω
50 Ω
+20 dBu (minimum gain)
12-position switch from +7 dB to +65 dB
Continuously variable from 0 dB to +20 dB
Switchable, passive first-order high-pass filter
Selectable frequencies (-3 dB) at either 115 Hz or
230 Hz
Pin-2 is high
Green LED ≅ -20 dBu;
Yellow LED = 0 dBu;
Red LED ≅ +20 dBu (cl27 dBu)
Half-rack wide (8.5 in), 1 rack unit high (1.8 in)
8 in deep (measured with knobs)
(21.59 cm x 20.32 cm x 4.6 cm)
2 lb (0. 894 kg)
1 lbs 1 oz (0.483 kg)
7 feet 8.5 inches (2.3 m)
Power supply length may be
supplemented with longer IEC cable.
11
In compliance with the following requirements: RoHS2 Directive: 2011/65/EU