10
In addition to the above settings, are three indicators:
ERT: This is the estimated run time remaining for the remaining charge on the batteries. When the
unit is plugged in, the percent charge is displayed here.
BATTERY STATUS: Cells total voltage and Current draw are displayed. As the battery voltage
decreases, the current draw will increase. When the battery voltage drops to below 8V, the unit will
power down, saving the current settings before doing so.
CHARGER STAT: Displays the chargers status. The charger can have different states such as slow
charge, fast charge, battery check, etc.
DATE/TIME
Press ENTER to open sub-menu to set date/time (see below).
Press ESC to exit the Meter Menu.
SET DATE & TIIME screen
Selecting DATE/TIME from the Meter menu will bring up the date/time set screen:
Notes: Use LEFT/RIGHT arrow keys to select the field to be changed. Use the UP/DOWN arrow keys
to modify.
Press ENTER to exit and save changes in Date/Time Menu. Exit will go up a level to Meter Menu,
press ESC to exit to Measurement Screen.
Mode Menu
The Mode Key of the BRAVO EX2 will open this OPTIONS screen. This allows you to
change the various measurement options and settings for the instrument. Use UP/DOWN
arrow keys to select (highlight) desired selection and LEFT/RIGHT arrow keys to select
options in horizontal menu list or use ENTER to go to a submenu where indicated.
