AE 80946 Скачать руководство пользователя страница 25

Страница: 25 / 26

:: Droop Settings

Set droop by measuring overall length of shock (from standoff to shock pin) while the chassis is elevated above your

working surface. The shocks should be fully extended.

Kit setup for front droop is 105mm shock length, and 126mm shock length for the rear.

If the shock length is too long, adjust by turning the droop screws clockwise.

If the shock length is too short, adjust by turning the droop screws counter-clockwise.

Front Droop:

Increasing front droop (loosen droop screws) will increase off-throttle steering. It also allows the

front end to lift more, giving more rear grip and less front grip on-power. Remember to never loosen the screws beyond

the FULL DROOP setting. Decreasing front droop (tighten droop screws) yields more on-power steering and quicker

response at the expense of some stability in bumpy sections. It will also give less off-throttle steering.

Rear Droop:

Increasing rear droop (loosen droop screws) will increase traction in bumpy sections, but will reduce

high-speed stability. Remember to never loosen the screws beyond the FULL DROOP setting. Decreasing rear droop

(tighten droop screws) will increase stability in high speed sections, but will reduce stability in bumpy sections.

Setup Sheets:

To find different setups for your kit, visit our website, https://www.associatedelectrics.com/teamassociated/and click

on the “Setup Sheets” link, and then the link to your model. Our team of professional drivers help develop these setups

at races worldwide. Additionally, most drivers have a “base” setup that they use as a starting point for most races.

Try running some of our base setups or look for track conditions and tires that are similar to your local track and

replicate that setup. Remember, each adjustment has a purpose, so copy everything from the setup sheet and then

make adjustments based on the recommendations in here.

Содержание 80946



























Результаты поиска

Содержание 80946

Отзывы:

Похожие инструкции для 80946

Бренды по названию

Популярные бренды

AE 80946, Руководство пользователя

Результаты поиска

Содержание 80946

Отзывы:

Похожие инструкции для 80946

Бренды по названию

Популярные бренды