Instruction manual VibraLITE 2 / 3
The vibration watch is equipped with:
Vibration Alarm
won't disturb others
Beep Alarm
option
Auto Reload Countdown Timer
can be set for seconds, minutes & hours. Use for
reminders such as medical conditions, medication, timing presentations or procedures,
parking, cooking. Will automatically reload to preset countdown time
(VibraLITE 3 only)
.
Electro-Luminescent back light
for viewing display at night
Second Clock
great when travelling in a different time zone
Two Alarm Settings
use for daily reminders, wake up, snooze, medication
Hourly Alert/Chime Option
12 or 24 Hour clock choice
Stopwatch
OPERATING MODES
1) Calendar Clock
2) Stopwatch
3) 2nd Clock
4) 1st Alarm
5) 2nd Alarm
6) Countdown Timer
BEFORE YOU BEGIN
Press the MODE, START/STOP, LAP/RESET buttons at the same time and hold until
display clears. Release buttons.
The clock time will be at 12:00 A.M. with the Alarms, Hourly Alert, Beeping and Vibration
functions not set. The date will be January 1 and the display will show MO for Monday.
FIRST TIME SETTING OF YOUR CALENDAR/CLOCK
1. Repeat pressing the MODE button until the
CALENDAR CLOCK
operating mode shows.
2. Press & hold the LAP/RESET button until the seconds digits begin to BLINK. Press the
START/STOP button to reset the seconds display to 00
.
3. Press the MODE button. The hour digits will begin to BLINK. Press the START/STOP
button to rotate to the correct hour of the day.
Note: Setting the time in the afternoon or the evening, the PM must show on the display.
4. Press the MODE button to go to the minute digits. The minute digits will begin to BLINK.
Press the START/STOP button to rotate to the correct minute.
5. Press the MODE button and the 12H (12 Hour) mode will BLINK on the display. To select
the 24 Hour mode press the START/STOP button once. 24H will show on display.
6. Press the MODE button for the date. The number 1 will BLINK at the top left corner of the
display. Press the START/STOP button to rotate to the correct date of the month. (1 - 31).
7. Press the MODE button for the month. The number 1 will BLINK on the display. Press the
START/STOP button to rotate to the current month of the year (1 - 12).
8. Press the MODE button for the Day of the week. MO will BLINK on the display. Press the
START/STOP button to rotate to the current day.
9. Press the LAP/RESET button after the setting. The display will stop blinking.
HOW TO SET AN ALARM CLOCK
1. Repeat pressing the MODE button to rotate to A1
(1st ALARM)
or A2
(2ND ALARM).
2. Press & hold the LAP/RESET button until the hour digits BLINK. Press the START/STOP
button to rotate to the hour wanted.
Note: In the 12 Hr Mode, remember to use the PM indicator for correct setting.
3. Press the MODE button to go to the minutes. The minutes will BLINK. Press the
START/STOP button to rotate to the minute wanted.
4. Press the LAP/RESET button when finished. The display will stop blinking.
Note: The Alarm is not yet activated. Follow the next steps.
ON/OFF SETTINGS OF ALARMS
Note: To turn on or off First Alarm you must be in the A1 mode. To turn on or off Second
Alarm you must be in the A2 mode.
1. Repeat pressing the MODE button to show
alarm you wish to turn off or on (A1 or A2).
2. Repeat pressing the START/STOP button to rotate, alarm on (hourly alert) & alarm off.
When icon(s) shows, alarm is set. Alarm is off when icon does not show.
