21
3.
Click
Save
.
Image
Image
NOTE!
⚫
The image parameters displayed and value ranges allowed may vary with camera model. For the actual
parameters and value ranges of your camera, see the Web interface. You may move the sliders to adjust
settings or enter values in the text boxes directly.
⚫
Clicking
Default
will restore all the default image settings.
Setting the Scene
Set image parameters to achieve the desired image effects based on live video in different scenes.
Click
Setup
>
Image
>
Image
.
The scene management page for some models is displayed as follows, you can select the desired scene in
the drop-down list.
The scene management page of some models is displayed as follows, you can take the following steps to
configure the scene.
1.
Click
Scenes
.
2.
Select a scene, and then set scene switching parameters. The following table describes some major
parameters.
Column
Description
Current
Indicates the scene that is being used.
Note
:
⚫
Select an option button to switch to the scene and display the corresponding image
parameters for the scene.
⚫
The camera switches the current scene automatically when
Enable Auto Switching
is
selected.
Scene Name
Name of the current scene. The device provides several preset scene modes. When you
select a scene, the corresponding image parameters are displayed. You can adjust image
