AdvenChair Field Guide
Page 5
Figure 3. Positioning the footrest and casters.
Casters and footrest are shown in wheelchair mode.
Detent Pins:
The pins and the holes they fit into are color coded for clarity.
Red:
Controls position/angle of the entire footrest assembly.
Holes 1, 2, and 3 allow angles of 22, 38, and 45 degrees from vertical for
adjustment for the rider.
For transport and storage, the footrest assembly can be rotated up so the footrest
support tubes are vertical and the footrest tray is next to the seat. The red pin is
then inserted into hole 3 from the bottom to hold the footrest assembly in place.
Green:
Adjusts the height of the footrest.
Blue:
Controls the angle of the footrest tray.
Yellow:
Controls the angle of the caster assembly.
Arrows show direction of rotation of each part, not the detent pins.
