R3765/67G Series Network Analyzer Operation Manual
7.14 Save/Recall
7-146
7.14.5 Setting File Name
The file name is used for searching so that it can be searched easily. When recalling, the file is
called as the named file set.
The setting and the explanation
Press the [SAVE] to call the save menu. (Refer to section A.4.)
Press the {STORE FILE} to call the store file menu.
Press the{NAME } , {NAME } to select a desired file name.
Press the {EDIT NAME} to display the label window (Figure 7-19) and calls the char-
acter editing menu.
Character menu
{DONE}
: Completes editing.
{CURSOR }
: Shifts the label cursor right.
{CURSOR }
: Shifts the label cursor left.
{BACKSPACE}
: Executes the back space operation.
{DELETE CHAR}
: Deletes the character of the cursor position.
{CLEAR NAME}
: Clears all the characters (names).
{CANCEL}
: Cancels editing.
CAUTION!
The setting of file name is effective only for the stored file.
If the name is set to the unstored file and the power source is switched off without exe-
cuting the store, the set file name is not stored.
1
2
3
4
5
