R3132 Series Spectrum Analyzer Operation Manual
3.3.28 TRACE Key (Trace Data)
3-77
3.3.28 TRACE Key (Trace Data)
This section describes Trace A(B) menu (1/2) displayed when the TRACE key is pressed.
Write A(B)
Sets the Write mode which updates the data in the A(B) memory
for each sweep.
View A(B)
Sets the View mode which holds the data in the A(B) memory.
Blank A(B)
Sets the Blank mode which erases the trace.
Max Hold A(B)
Executes the Max Hold mode which displays the maximum value
for each trace sample (when you select the Max Hold mode, the
positive mode is automatically selected. Refer to Posi.)
Detector
Displays the Trc Det A(B) menu from which you can set the de-
tection mode used.
Normal
Sets the normal mode which automatically detects positive or
negative peak points for each trace point.
Posi
Sets the positive peak mode (when you select the Max Hold
mode, the positive mode is automatically selected. Refer to Max
Hold A(B).)
Nega
Sets the negative peak mode (when you select the Min Hold
mode, the negative mode is automatically selected. Refer to Min
Hold A(B).)
Sample
Sets the sample mode.
Trc Menu A/B
Toggles between trace A and trace B.
1/2_more
Displays the Trace A(B) menu (2/2).
AVG A(B)
Displays the AVG A(B) menu.
AVG A(B) ON/OFF
Toggles the averaging function on or off.
ON:
Turns averaging on.
OFF:
Turns averaging off.
Average PSE/CONT
Toggles between PSE (pause) and CONT (continue) while the av-
eraging function is being used.
PSE:
Temporarily pauses averaging and displays the current
averaging count.
CONT:
Resumes averaging from the point at which the pause
occurred.
