manualshive.com logo in svg

Advantek Networks ADR-18CU, Руководство пользователя, Страница: 44 / 55

Поделиться
Скачать
Advantek Networks ADR-18CU Скачать руководство пользователя страница 44

ADSL Full-Rated Router    40

6.7  Miscellaneous Configuration

The 

Miscellaneous Configuration

 allows user to set all the miscellaneous configurations, which 

include HTTP server, FTP server, TFTP, DMZ, IGMP, PPP, and SNTP setup configuration.

HTTP Server Access

: This field allows the user to configure the Web pages can be accessed from.

ALL

: When this field is checked, it allows both WAN and LAN access to the Web pages.

Restricted LAN

: This field allows the Web pages access from LAN side.

Restricted WAN Specified IP & Subnet Mask

: This field allows the Web access from WAN side with a 

specify IP and subnet mask.

HTTP Server Port

: This field allows the user to specify the port of the Web access.  For example, when 

it is changed to 1001, the HTTP server address for the LAN side is 

http://10.0.0.2:1001

 . 

HTTP Password Protection

: This field allows user to enable or disable password protection for HTTP 

server.

FTP server

: This field allows the user to enable or disable the FTP connection.

TFTP server

: This field allows the user to enable or disable the TFTP connection.

An example for the TFTP client updating the vxworks.z product image code is:

Содержание ADR-18CU
























































Отзывы:

Нет отзывов