manualshive.com logo in svg

Advantek Networks ADR-18CU, Руководство пользователя, Страница: 32 / 55

Поделиться
Скачать
Advantek Networks ADR-18CU Скачать руководство пользователя страница 32

ADSL Full-Rated Router    28

Session Name

: This field allows the user to enter his/her own session Name to distinguish different NAT 

session for different interfaces among different PPP sessions and different PVCs.

Interface

: This field allows the user to choose specific WAN Interface (PVC or PPP Session) for NAT 

Session.

Click the link 

Go back to NAT Configuration

 to the NAT configuration page.  Select the 

NAT

 option. 

Select the Session Name and assign the PC IP address, and choose the 

Add

 action. Click the 

Submit

 

button and go to the 

Save Settings

 to save this configuration.

NAT allows only one entry (User IP) per session

. NAPT allows many entries (User IPs) per session.

5.3.5 Virtual Server Configuration

The Virtual Server Configuration page allows the user to set the configuration of Virtual Server. 

The Conexant firmware includes the Free BSD version firewall. All UDP/TCP ports are protected from 
intrusion. If any specific local PCs need to be mapped to the UDP/TCP port on WAN side, please input 
the mappings here.

Содержание ADR-18CU
























































Отзывы:

Нет отзывов