manualshive.com logo in svg

Advantek Networks ADR-18CU, Руководство пользователя, Страница: 11 / 55

Поделиться
Скачать
Advantek Networks ADR-18CU Скачать руководство пользователя страница 11

ADSL Full-Rated Router    7

4. Connecting ADSL Router via Ethernet and USB

You can connect ADSL router with PC through either Ethernet cable or USB cable.  After connection is 

established, you can configure the host PC to be a DHCP client. You have to repeat the same steps for every 
host PC on your network if you use DHCP function on your router.

4.1  Setup ADSL router via Ethernet Cable

If there is an available Networking LAN card present on your PC, you just simply connect ADSL router 

and PC through the Ethernet cable. Once you establish Internet connection, you could browse the Web 
through the Ethernet cable.

4.2  Setup ADSL router via USB Cable

You can connect ADSL router with PC via USB cable when there is no Networking LAN Card present on 

your PC. USB cable acts as another LAN connection in this scenario. Once you establish Internet connection, 
you could browse the Web through the USB cable.

USB Device Driver Installation

Step1: Connect ADSL Router and PC with USB cable.
Step2: Once “

Detect New USB Device

” window pops out, click “

cancel

”:

   

   

For windows 98SE and ME

:

For Windows 2000 and XP

:

Содержание ADR-18CU
























































Отзывы:

Нет отзывов