Advantech WISE-1540, Руководство пользователя

Страница: 27 / 43

WISE-1540 User Manual 26
3.6. Setting for Connectivity
WISE-1540 is designed in connectivity for wireless IoT communication with Linear
Dust SmartMesh IP wireless sensor networks. The Linear Dust networks support a
self-forming and self-healing mesh network solution complaint to 6LoWPAN Internet
Protocol (IP) and IEEE802.15.4e standard. Before using WISE-1540 SDK, the user
needs to check or set some parameters through the console for API.
Parameter Expected Setting
Network
ID
2001 (The same as manager on WISE-3310)
Join Key
4A4F494E414456414E54454348494F54 (The same as manager on
WISE-3310)
Auto Join On
Reset to default setting
This function can be used back to default setting the same as above section
"Information and Parameters Setting". The user can refer to section "Preparing for
Hardware" for how to do it on the WISE-DB1500.
Console for API
We provide the console and the user can set parameters for connectivity by command
set we supported.
Step01: Check device connected from WISE-ED20 or WISE-ED22 to PC using
micro-USB cable and choose any terminal you like. (e.g., the snapshot is setting of
Tera Term.)