UNO-2182 User Manual
18
Chapter 3 Initial Setup
3.1 Chassis Grounding
The aluminum made UNO-2182 provides good EMI protection and a sta-
ble grounding base. There is an easy-to-connect chassis grounding point
for you to use.
Please connect chassis ground of UNO-2182 with "EARTH" as ground.
Figure 3.1: Chassis Grounding Connection
3.2 Inserting a CompactFlash Card
The procedure for installing a CompactFlash card into the UNO-2182 is
detailed below, please follow these steps carefully.
1.
Remove the power cord.
2.
Unscrew the four screws from the rear panel.
3.
Remove the storage panel.
4.
Plug a CompactFlash card with your OS and application program
into a CompactFlash card slot on board. (CN8)
5.
Screw back the rear panel with four screws
Note:
UNO-2182 is design as system power ground
and chassis ground is separated.
