Advantech UBC-220 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 62

Advantech UBC-220 Скачать руководство пользователя страница 44

UBC-220 User Manual

36

8.

Select “Device Drivers”-->”Real Time Clock”, you will see an option “Seiko
Instruments S-35390A” on the list. Choose this option then exit and save your
configuration.

Figure 3.2 Selecting Seiko Instruments S-35390A

9.

Change directory to “source/linux-3.0.35/arch/arm/mach-mx6”, edit the “board-
mx6dl_ubc220.h” and “board-mx6q_advantech.c”.
Please add below codes to source/linux-3.0.35/arch/arm/mach-mx6/board-
mx6dl_ubc220.h:

static struct i2c_board_info mxc_i2c0_board_info[] __initdata
= {
   {
      I2C_BOARD_INFO("adv-wdt-i2c", 0x29),
   },
   {
      I2C_BOARD_INFO("s35390a", 0x30),
   },
};

Please add below codes to
source/linux-3.0.35/arch/arm/mach-mx6/board-mx6q_advantech.c

i2c_register_board_info(0, mxc_i2c0_board_info,
ARRAY_SIZE(mxc_i2c0_board_info));

10.

Please refer to former Chapter 3.3.2 to rebuild the kernel with RTC driver (Seiko
Instruments S-35390A) after completing above steps.

Note!

If you cannot find the driver for your device from the list, please contact
your hardware vender.

«
...
42
43
44
45
46
...
»

Содержание UBC-220































































Отзывы:

Нет отзывов