Advantech TPC-300 Series, Руководство пользователя

Страница: 71 / 88

61 TPC-300 Series/TPC-B510 User Manual
Ap
pe
nd
ix C
BIO
S S
etu
p
C.1.1 Main Setup
Upon entering the BIOS Setup Utility, users will be on the Main setup screen. At any
point during the configuration, users can return to the Main setup screen by selecting
the Main tab. There are two Main setup options, which are described in this section.
The Main setup screen is shown below.
The Main setup screen has two main frames. The left frame displays all the options
that can be configured. Grayed-out options cannot be configured, whereas options
presented in blue can be configured. The right frame displays the key legend.
Above the key legend is an area reserved for a text message. When an option is
selected in the left frame, it is highlighted in white. Often a text message will accom -
pany an option.

System Time/System Date
Use this option to change the system time and date. Highlight System Time or
System Date using the <Arrow> keys. Enter new values via the keyboard. Press
the <Tab> key or the <Arrow> keys to move between fields. The date must be
entered in MM/DD/YY format. The time must be entered in HH:MM:SS format.
Note!
Before installing a WinCE image, IDE configuration is required. Addition -
ally, the SATA mode must be set to IDE mode in the BIOS to enable
boot up.