Advantech TPC-1881WP Series, Руководство пользователя

Страница: 13 / 50

TPC-XX81WP
User Manual
5
1.7 I/O Ports Arrangement
The arrangement of the I/O ports is shown in Figure 1.1
Figure 1.1 I/O Port Arrangement
1.8 Panel Mounting
1. There is an adhesive waterproof gasket on the Mg front bezel. Make sure the
waterproof gasket is in position before installing TPC into the panel opening.
1. Install the TPC into the panel opening.
2. Find the eight clamps and eight long screws in the accessory pack. Hook the
clamps to the holes around the four sides of the bezel. Insert the screws into
every clamp and fasten them. These screws will push the mounting panel and
fix the unit.
3. The suggested mounting panel thickness is less than 6 mm
(0.236”).
Figure 1.2 Panel Mounting
Ch
ap
ter
1
G
en
era
l Inform
atio
n