Advantech SSPB-3000C, Инструкция по установке и эксплуатации, Страница: 37 / 55

SSBP-3000C
Page 36
TABLE 11: RS-232 MENU ITEM DEFINITION
Item Description
S/N:
Serial Number of the SSPB unit (B2309, in this case)
Soft:
Version number of the software within the SSPB unit (1.0, in this case)
Unit Pos:
Indicates which path the SSPB is connected to in a 1:1 redundant system:
‘A’ or ‘B’. For a standalone unit, the display ‘N/A’ is indicated (for Not
Applicable)
Name: Name of the SSPB unit (200 C, in this case)
MAC:
M&C communication address for RS-485 interface (0x01, in this case)
Current:
Total current consumption from the +12 V DC power supply, in amperes
(030.4 A, in this case)
TxF shift:
Transmission Local Oscillator frequency in MHz (4900, in this case)
FPWR:
Forward (output) Power in dBm (21.0 dBm, in this case)
TxGain: Transmission Gain in dB (62.0 dB, in this case)
Tx Stat:
Transmission Status (On, in this case; might be On-for RF On or Off- for
MUTE)
RPWR:
Reverse (reflected) Power in dBm (00.0 dBm, in this case – any value
below 20.0 dBm will be displayed as 0.00 dBm)
Temp HS: Hot Spot temperature in
°
C (+035.3
°
C, in this case)
PS:
Power Supply voltage in volts (+012.1 V, in this case)
Alarms:
Provides the fault messages and the normal status message:
1. Alarm (12 VDC current, faulty RF devices, power supply
failure, or L-Ku up-converter module failure).
2. Temperature shutdown (ambient temperature exceeds 85ºC).
3. OK (SSPB is functioning properly).
Tx WGSW:
Status of Transmission W/G Switch (N/C, in this case, for Not Connected)