Advantech SNMP-1000-B1, Руководство пользователя

Страница: 18 / 86

SNMP-1000-B1 User’s Manual 8
Chapter 2 Hardware Installation
2.1 Kernel Module Installation
The SNMP-1000-B1 modular design eases the I/O connection. The ker-
nel module is to be mounted on an I/O extension/carrier module. There
are several available extension modules designed for specific application
needs. If your extension module is not identical as the one depicted in
this section, please refer to the user's note of your extension module for
the detail.
The kernel module has two 32-pin connectors, named as MCN1 and
MCN2. The extension module has two 32-pin connectors, named as
CN11 and CN12. MCN1 of kernel module is to be mounted on CN 11 of
extension module, and MCN2 of kernel module is to be mounted on
CN12 of extension module. After mounting the kernel module, secure it
to the extension module with stud and screws
Figure 2.1: Installing kernel module and battery