SmartStart SL304
5.8.1
Status indication
There are three LED indicators on the front panel to provide router status information. The
ETH port has two additional LEDs that provide information about the port status.
Caption
Color
State
Description
PWR
Green
Blinking
On
Fast blinking.
Router is ready.
Starting of the router.
Updating firmware.
DAT
Red
Blinking
Communication in progress on the radio channel.
WAN
Yellow
Fades out 1x/5 s
Fades out 1x/2 s
Fades out 1x/1 s
Signal strength is good.
Signal strength is fair
1
.
Signal strength is poor
2
.
For value ranges of signal strength see
Configuration
manual
, chapter
Mobile WAN Status
.
ETH
Green
On
Off
Selected 100 Mbps.
Selected 10 Mbps.
ETH
Yellow
On
Blinking
Off
The network cable is connected.
Data transmission.
The network cable is not connected.
Table 5: Status indication
The status indication of the WAN LED is updated every 10 seconds.
1
Or the difference between neighbouring cells is exactly 3 dBm.
2
Or the difference between neighbouring cells is smaller than 3 dBm.
16
