SmartMotion ST352
5. Router Design
5.1
Router versions
SmartMotion ST352 router is supplied in the following versions (see table below). All ver-
sions are available in a metal box. All versions are available with PoE PD (Power over Ethernet
– powered device) so you can power the router from both ETH0 and ETH1 interfaces, or with
PoE PSE (power source equipment) so you can power other devices by the router.
Router versions
SIM
BIN
B
OUT
USB
SD
ETH
W
iF
i
Basic version
4 x
2 x
1 x
1 x
1 x
2 x
Version with WiFi module
4 x
2 x
1 x
1 x
1 x
2 x
1 x
Table 1: Router versions
Figure 6: Basic version
Figure 7: Version with WiFi module
5.2
Product Revisions
For the product revision history, see the table below. The revision number is printed on the
packaging and product labels.
The router GUI can also display the product revision under
Status -> General -> System
Information -> Product Revision
. Please note that the default revision (Rev.1.0) is unavailable
here.
Rev.#
Description
1.0
Initial version (revision not printed on the labels).
2.0
New SIM slot type; see
for details.
Table 2: HW Revisions History
9
