Advantech PPC-315W TGL Скачать руководство пользователя

Страница: 10 / 50

PPC-315W/321W-TGL User Manual

1.1

Introduction

Advantech's PPC-315W/321W TGL is an all-in-one light panel PC with a wide format
15.6"/21.5" full HD LCD screen. It is powered by an Intel

11th Gen Core™ i proces

sor, PPC-315W/321W TGL to provide good performance, optimal memory, graphics,

and peripheral I/O support in a compact, fanless, embedded system. With a high

durability design, PPC-315W/321W TGL adopts a flat touch screen with IP66 rated

front panel in a die-cast AI alloy enclosure. It is an ideal choice for integration into

various applications.

1.2

Key Features



Robust IP66-rated true-flat color TFT LCD



Ultra-thin fanless design with solid aluminum alloy enclosure



Intel

11th Gen Core™ i CPU with fanless design



Dual channel memory slots, max 64G



Supports dual displays (1 x external HDMI)



1 x M.2 bay (2242/2280 NVME or SATA Interface) for storage and support SATA

RAID 0, 1



1 x 2500BASE-T Ethernet Supports Time-Sensitive Network (TSN) technology



Support TPM2.0 hardware security



Supports Type C (USB only)

1.3

Front Panel

The PPC-315W/321W TGL front panel is a true-flat color TFT LCD touchscreen with

Projected Capacitive Multi-Touch. The front panel is IP66 rated for dust and water tol

erance (Figure 1.1).
Note: The examples provided in this manual are of the PPC-315W TGL model.

Figure 1.1 Front Panel

Power status LED: Off (S5) Orange; Sleep (S3) Orange; On (S0) Blue.

Touch Screen

Aluminum

Frame

LED Indicator

for Power

Содержание PPC-315W TGL



















































Результаты поиска

Содержание PPC-315W TGL

Отзывы:

Похожие инструкции для PPC-315W TGL

Бренды по названию

Популярные бренды

Advantech PPC-315W TGL, Руководство пользователя

Результаты поиска

Содержание PPC-315W TGL

Отзывы:

Похожие инструкции для PPC-315W TGL

Бренды по названию

Популярные бренды