Advantech PCM-3618, Руководство пользователя

Страница: 26 / 28

PCM-3618 User Manual 18
4.1 Hardware Installation
Installing the Module on a CPU Card:
1. Turn the PC's power off. Turn the power off to any peripheral devices such as
printers and monitors.
2. Disconnect the power cord and any other cables from the back of the computer.
3. Remove the system unit cover (see the user's guide for your chassis if neces-
sary).
4. Remove the CPU card from the chassis (if necessary) to gain access to the
card's PC/104 connector.
5. Screw the brass spacer (included with the module) into the threaded hole on the
CPU card. Do not tighten too much, or the threads may be damaged.
6. Carefully align the pins of the PCM-3618 with the PC/104connector. Slide the
module into the connector. The module pins may not slide all the way into the
connector; do not push too hard or the module may be damaged.
7. Secure the module to the CPU card to the threaded hole in the CPU card using
the included screw.
Warning! TURN OFF your PC power supply whenever you install or remove
thePCM-3618 or connect and disconnect cables.