Advantech PCM-3618, Руководство пользователя

Страница: 22 / 28

PCM-3618 User Manual 14
After you finish the installation, you can click [Exit] and restart your system. Unless
the system is restarted, the latest con-figuration will not take effect.
3.4 Jumper Setting
Enhanced Mode:
In this mode, the I/O addresses and IRQ level for each port are set to default as
shown below (make sure that the I/O address on BIOS setting of on-board COM1 ~
COM4 does not conflict with [Base Address] ~ [Base A 20h]).
Speed Mode
Speed of SW2 is used to decide the speed mode of this card.
Speed: ON (Upper) position High Speed Mode
Speed: OFF (Lower) position Normal Speed Mode
Operating System Mode
Connect the left two pins of JP8 to use DOS, Windows 3.1
Connect the right two pins of JP8 to use Windows 95/98/NT
Port No. I/O Address COM Port No. IRQ Level(*) Shared IRQ
Port 1 Base 00H COM1 JP3
Port 2 Base 08H COM2 JP3
Port 3 Base 10H COM3 JP3
Port 4 Base 18H COM4 JP3
Port 5 Base 20H COM5 JP3
Port 6 Base 28H COM6 JP3
Port 7 Base 30H COM7 JP3
Port 8 Base 38H COM8 JP3