Advantech PCI-1713U, Руководство пользователя

Страница: 22 / 38

PCI-1713U User Manual 14
3.3 Analog Input Connections
This section continues to describe how to make analog input signal con-
nections to the PCI-1713U card via the I/O connector.
Single-ended Channel Connections
The single-ended input configuration has only one signal wire for each
channel, and the measured voltage (Vm) is the voltage of the wire
referred to the common ground.
A signal source without a local ground is also called a “floating source”.
It is fairly simple to connect a single-ended channel to a floating signal
source. In this mode, the PCI-1713U card provides a reference ground
for external floating signal sources.
Figure 3.2: Single-ended Input Ch.
External Internal
Floating
Signal
Source
+
_
Vs
Multiplexers
AI31
AI1
AI0
PGIA
_
+
+
_
Vm
Measured
Voltage
I/O Connector
GND