17
Chapter 2
Configuring the Device
3.
Please click the Setup button to configure your device. On the
Device Setting
dialog box (Fig. 2-4), you can configure the A/D
channels configuration either as
8 Differential
or
16 Single-ended
,
specify the D/A voltage reference either as
External
or
Internal
and
specify the voltage output range for the two D/A channels.
Figure 2.4: The Device Setting Dialog Box
4.
After your card is properly installed and configured, you can click
the
Test…
button to test your hardware by using the testing utility
supplied.
Figure 2.5: The Test Utility Dialog Box
For more detailed information, please refer to
Chapter 2
of the
Device
Drivers Manual
. You can also find rich examples on the CD-ROM to
speed up your programming.
Содержание PCI-1710HGU
