manualshive.com logo in svg

Advantech PCI-1602B, Руководство пользователя

Поделиться
Скачать
Advantech PCI-1602B Скачать руководство пользователя страница 45

35

Chapter 2  

2.4  Card Installation

1.

Install the driver; see chapter 3.1 and chapter 3.2.

2.

Turn off the computer and all peripheral devices (such as printers 
and monitors).

3.

Disconnect the power cord and any other cables from the back of 
the computer.

4.

Remove the PC’s cover (refer to your user’s guide if necessary).

5.

Install and plug the PCI communication card on your PCI BUS.

6.

Replace the PC’s cover. Connect the cables you removed in step 3.

7.

Turn the computer power on.

8.

Driver will install PCI Communication card automatically, see 
chapter 3.3 and 3.4 and 3.5.

9.

Test your COM port and verify if COM port could work normally, 
see chapter 4.

10.

Refer to the pin assignment and cabling for further information, see 
chapter 5.

Note:

We strongly recommend that you install the soft-
ware driver before you install the hardware into 
your system, since this will guarantee a smooth 
and trouble-free installation process.

Turn off your PC’s power supply whenever you 
install or remove the PCI communication card or 
its cables. Static electricity can easily damage 
computer equipment. Ground yourself by touch-
ing the chassis of the computer (metal) before 
you touch any boards. See the static warning on 
Ch.2

Содержание PCI-1602B











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды