manualshive.com logo in svg

Advantech PCI-1202, Руководство пользователя

Поделиться
Скачать
Advantech PCI-1202 Скачать руководство пользователя страница 52

PCI-1247 User Manual

44

Chapter 4  Utility Software

4.1  EzLink

EzLink is a user-friendly utility for the purpose of testing and debugging 
AMONet. EzLink supports two types of remote slaves: DIO slave mod-
ules, and 1-axis motion slave modules. 

There are three main steps to make use of EzLink: First, you scan how 
many master cards are installed in the system. Then you can connect the 
master and slave devices. After that, you can scan how many slave mod-
ules are installed in each ring of the master. EzLink can identify the type 
of slaves as being DIO or Motion slave automatically and can test their 
functions.

EzLink is designed to assist in testing system configurations. This can 
reduce the communication effort between software programming engi-
neers and hardware engineers. You do not have to do any coding during 
the system configuration testing with EzLink. It is a really helpful tool to 
both hardware and software engineers.

4.1.1 Minimum System Requirements

PC: IBM PC Compatible with at least x586 CPU
Memory: 128 MB RAM
OS: Windows 2000/XP

4.1.2 Description

Start-up of EzLink

The menu shown in figure 4.1 will be displayed when you start-up 
EzLink. The menu selection is on top of the display. In the middle is an 
SDI operation menu. Multiple dialog boxes can be shown in this display. 
On the top is the tool bar, which can be used to do basic operations. In the 
left window is an overview of the master card and slave modules that are 
currently connected. On the right is information about slave modules 
including slave ID. At the bottom, messages about the system such as 
communication status and detailed operation information are displayed.

    

Содержание PCI-1202





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды