Advantech MIC-5602, Руководство пользователя

Страница: 65 / 74

53 MIC-5602 User Manual
Chapter 5
M
MC Firmware
O
peration
- sol set <parameter> <value> [channel]
This command allows modifying one of the following SOL configuration parameters:
! session privilege level (<parameter> = "privilege-level"),
! character accumulate level (<parameter> = "character-accumulate-level"),
! character send threshold (<parameter> = "character-send-threshold"),
! retry count (<parameter> = "retry-count").
5.3.4 SoL Session Establishment with ipmitool
To establish an SoL session it is recommended to use the ipmitool. It's available both
in Windows and Linux versions. To establish a SoL session with the ipmitool, the lan-
plus interface must be used (different to chapters before, where serial-terminal and
lan interfaces can be used!).
"IP-Address", "Username" and "Password" used for SoL are the important parame-
ters for establishing a SoL session. These parameters (<ipaddr>, <username>,
<password>) are configurable via different ipmitool commands (refer to the previous
section "SoL configuration with IPMItool") and can be changed at run-time. The gkey
parameter is fixed in the MMC firmware and cannot be changed.
ipmitool -o adv -C 1 -I lanplus -H <ipaddr> -U <username> -P <password> -k gkey sol
activate usesolkeepalive
user@pramc:~$ ipmitool <connection-method> sol set privilege-level admin 1
Note! The remaining SOL configuration parameters defined in the IPMI v2.0
specification are read-only.
Note! A modified version of ipmitool needs to be used to establish SoL ses-
sions successful. It is available as source and binary executable on the
Advantech MIC-5602 product web site.
ipmitool -o adv -C 1 -I lanplus -H 172.21.35.103 -U user -P password -k gkey
sol activate usesolkeepalive
[SOL Session operational. Use ~? for help]