manualshive.com logo in svg

Advantech MIC-5602, Руководство пользователя

Поделиться
Скачать
Advantech MIC-5602 Скачать руководство пользователя страница 62

MIC-5602 User Manual

50

5.3.3

SoL Configuration with ipmitool

The ipmitool utility can be used to configure the SoL parameters stored in the MIC-
5602 MMC according to your needs.

Please verify the previous chapter for proper connection options to the MMC
(whether serial payload interface or LAN). The way to connect is replaced with a
placeholder (<connection-method>) in the following chapter's descriptions.

The MIC-5602 uses following default parameters for Serial-over-LAN:

Channel Numbers:
1 - first network interface of the Intel 82571 GbE
2 - second network interface of the Intel 82571 GbE

Username:

"user"

Password:

"password"

User ID:

2

Channel Privilege Level:2 (User)

IP-Address (channel 1):172.21.35.103
IP-Address (channel 2):172.21.35.104

Please find below all ipmitool commands that can be used to configure the SOL
parameters of the MIC-5602. 

5.3.3.1

Channel Commands

To get an overview of all possible channel commands please use the keyword "chan-
nel" only. This section only contains a description of the channel commands sup-
ported by the MIC-5602 for SoL.
- channel info [channel number]
It is used to get general information about an IPMI channel, e.g. to find out whether a
given channel is a LAN/SoL channel.

Note!

Channel Number 0 is assigned for communication with the primary 
IPMB per default by the IPMI specification.

user@pramc:~$ ipmitool <connection-method> channel info 1
Channel 0x1 info:
  Channel Medium Type   : 802.3 LAN
  Channel Protocol Type : IPMB-1.0
  Session Support       : single-session
  Active Session Count  : 0
  Protocol Vendor ID    : 7154
  Volatile(active) Settings
    Alerting            : disabled
    Per-message Auth    : disabled
    User Level Auth     : disabled
    Access Mode         : always available
  Non-Volatile Settings
    Alerting            : disabled
    Per-message Auth    : disabled
    User Level Auth     : disabled
    Access Mode         : always available

Содержание MIC-5602











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды