Advantech MIC-5602, Руководство пользователя

Страница: 14 / 74

MIC-5602 User Manual 2
1.1 Introduction
The MIC-5602 is a highly integrated single-width, mid-size, and economical proces-
sor AMC. Its design is based on the low-power, high-performance Intel Celeron M
ULV or Pentium M LV processor combined with the high-performance Intel 3100
chipset. The board includes 1 or 2 GB of soldered DDR2 400 MHz memory with ECC
for higher MTBF and optimum cooling. To facilitate development, test and integration
while offering typical network connectivity once deployed, the front panel provides a
gigabit Ethernet connector, a serial port and a USB 2.0 host port.
The MIC-5602 maximizes AMC edge connector connectivity for the best design flexi-
bility. When redundancy or two separate interconnects are required, the board can
be configured with two PCI Express x4 ports or with a single PCI Express x8 port
when throughput is essential. Two gigabit Ethernet ports provide AMC.2 compliance
and offer control and data plane connectivity to facilitate the migration of existing
applications. Both ports connect to the 3100 chipset via PCI Express for maximum
data throughput. Dual SATA interfaces provide AMC.3 compliant storage and two
USB ports offer further connectivity opportunities.
A dedicated Module Management Controller (MMC) monitors onboard conditions
and manages hot swap operation for field upgrades or module replacement without
the need to power down the underlying system.
1.2 Application
It is designed to allow communication equipment manufacturers to add modular and
upgradeable computing functionality to their AdvancedTCA or MicroTCA proprietary
baseboards and provide the localized capability necessary for applications such as
protocol processing, packet processing, data management and I/O management.
This AMC module is hot-swappable, which allows it to be replaced by operators or
service organizations in the field without bringing down an entire AdvancedTCA
blade or system.