Advantech MIC-3037 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 37

Advantech MIC-3037 Скачать руководство пользователя страница 23

1 4

MIC-3037 User's Manual

3.1 General Information

This backplane is used for the 1U-high CompactPCI

TM

enclosures,

MIC-3035 and MIC-3037, and provides two CompactPCI slots. One
slot is assigned to the CPU board and the other slot to one peripheral
board. The MIC-3037 supports front I/O wiring, providing simplified
system cabling.

The backplane provides four 3-pin connector for connecting up to 5
cooling fans. A 20-pin connector can be used for connecting an
external alarm module to detect the system internal conditions, such as
bus voltages, fan speed, and temperatures.

In order to provide users with a flexible system configuration, the MIC-
3037 includes one standard ATX power connector to accpet one ATX
power supply.

The MIC-3037 complies with PICMG 2.1 Hot-Swap Specification,
providing full hot-swapping capability. Users can build a hot-swap
system using hot-swap plug-in boards and software.

3.2 Features

- Two CompactPCI

TM

slots (one system slot and one peripheral slot)

- 64-bit bus width

- Complies with PICMG 2.1 Hot-Swap Specification

- Accepts up to two ATX power supplies

- Alarm module interface

- Fan interface

«
...
21
22
23
24
25
...
»

Содержание MIC-3037






































Отзывы:

Нет отзывов