LR77 v2
5.7
Description of the front panel
On the front panel is the following:
Caption
Connector
Description
PWR
2-pin
Connector for the power supply.
ETH
RJ45
Connector for connection into the local computer network.
PORT1
RJ45
Connector for expansion port RS232, RS458/422, MBUS,
ETHERNET, CNT or SWITCH.
PORT2
RJ45
Connector for expansion port RS232, RS485/422, MBUS,
SWITCH, WIFI, WMBUS or SDH (
only FULL versions
).
ANT
SMA
Connector for main antenna.
DIV
SMA
Connector for diversity antenna.
GPS
SMA
Connector for GPS antenna. It can be replaced with connec-
tor for WIFI or WMBUS antenna.
WIFI
R-SMA
Connector for WIFI antenna.
Available only when the
router is equipped with an expansion port WIFI.
WMBUS
SMA
Connector for WMBUS antenna.
Available only when the
router is equipped with an expansion port WMBUS.
USB
USB-A Host
Connector for connection of USB devices to the router. Sup-
ports devices with PL-2303 and FTDI USB/RS232 converters.
I/O
3-pin
Connector for connection of the binary input and output.
SIM1
—
Holder for the first SIM card.
SIM2
—
Holder for the second SIM card (
only FULL versions
).
Table 9: Front panel description
Figure 19: Front panel LR77 v2F(G)
15
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www
.lucom.de