Confidential and Proprietary
16
On your computer open the
Control Panel – Network and Internet – Network and Sharing
Center
Using your computer mouse, click on
Ethernet
Select
Properties
Select
Internet Protocol Version 4 (TCP/IPv4),
and select
Properties
Check
Use the following IP address
and enter information shown above. Select
OK
to apply
new settings (All open windows can now be closed)
2.7.2
IP Address Configuration (Dynamic IP)
For installations that contain multiple Access Points an external TCP/IP Ethernet hub is required;
setting up the IP address for each Access Point will require modification of the ELSA-M Daemon
Integration file, please refer to
UG-ELSA-M001: ELSA-M Daemon Integration Guide
for further
details.
