Confidential and Proprietary
15
2.7
Computer Configuration for LEO-D ePaper Display Soultion Installation
It can be seen in the diagram below that the system architecture consists of several key
components; a single or multiple Access Points, several Routers, multiple End Devices (LEO-D
tags) and the Platanus Daemon program running on a desktop.
This LEO-D Device Manager installation is designed to use either a static IP address for a single
Access Point or a dynamic IP address when multiple Access Points are installed.
2.7.1
IP Address Configuration (Static IP)
Ensure that your Access Point is connected to your computer.
Your Access Point comes pre-configured with a default IP Address
(192.168.2.1)
and therefore
prior to installing the ELSA-M firmware and software (reference Section 3.1) it is necessary to
modify the IP Address of the Ethernet port on your computer that is cabled to the Access Point
so that they can communicate with one another.
Ensure that your Access Point is connected to your computer.
