Advantech ITA-5831 Series Скачать руководство пользователя страница 63

Страница: 63 / 96

ITA-5831 User Manual

Chapter 4

IOS Settings

4.8

Save & Exit



Save Changes and Exit

This item allows users to exit the BIOS utility after saving all changes.



Discard Changes and Exit

This item allows users to exit the BIOS utility without saving any changes.



Save Changes and Reset

This item allows users to reset the system after saving all changes.



Discard Changes and Reset

This item allows users to reset the system without saving any changes.



Save Changes

This item allows users to save all changes to any of the setup options.



Discard Changes

This item allows users to discard any changes to any of the setup options.



Restore Defaults

This item allows users to restore the default values for the setup options.



Save as User Defaults

This item allows users to save all current settings as user defaults.



Restore User Defaults

This item allows users to restore all settings to the user defaults.

Содержание ITA-5831 Series

































































































Результаты поиска

Содержание ITA-5831 Series

Отзывы:

Похожие инструкции для ITA-5831 Series

Бренды по названию

Популярные бренды

Advantech ITA-5831 Series, Руководство пользователя

Результаты поиска

Содержание ITA-5831 Series

Отзывы:

Похожие инструкции для ITA-5831 Series

Бренды по названию

Популярные бренды