Advantech iPS-M S Series, Руководство пользователя

Страница: 20 / 32

iPS-M S series User Manual V.A1 10
Connecting iPS-M cable to System 1 or System 2 port, depends on equipment volt-
age definitions.
Figure 2.10 Cable connection
After all cables are well connected, turn on the battery power by pressing the power
button (hold for 7 seconds) on the remote control again and the battery is ready to
supply DC power to device.
2.4.2 Discharging Time Estimation
To estimate discharging time, you must need to know the power consumption of the
loader (PC or Device). For example, assuming power consumption of the loader is
40Wh, discharging time for different capacities of iPS-M batteries is listed following:
To device
To battery
Model Discharging Time Estimation
iPS-M420S 8 ~10 hours (400Wh / 40 Wh)
iPS-M210S 4~ 5 hours (200Wh / 40Wh)