Advantech iPS-M S Series, Руководство пользователя

Страница: 19 / 32

9 iPS-M S series User Manual V.A1
Chapter 2
G
etting
Started
When the battery is charging an LED indicator keeping flashing. If the battery capac-
ity reaches 100%, the LED indicator stops flashing and all LEDs are bright.
2.4 Battery Discharging
iPS-M power system provides 2 output modes to provide power to loader (PC or
other devices). DC power can provide from one of each DC output port or both ports.
Max Watt for System 1 and System 2 output:
System 1: 19V x 6A = 114W
System 2: 12V x 5A = 60W
Maximum output is around 174W.
2.4.1 Device Connection
Before connecting equipment to iPS-M power system, turn off battery power from the
remote control first. Then connect the cable to the battery system and equipment.
Figure 2.9 Battery power off
Caution! After purchasing the new iPS-M power system, you must charge the
battery to 100%, which keeps the battery cell in active status and
extends battery life.
Caution! When charged to 100%, its best to remove AC power to prevent OVER
CHARGING which may decrease battery life.
Press power button and hold
When power is off, all
for 7 seconds to turn off battery
power.
LED light will go off.