Advantech IDK-1110WR-50WSA1, Руководство пользователя

Страница: 26 / 35

IDK-1110WR User Manual 20
5.1 Touch Controller Characteristics
Advantech ETM-RES05C Touch Control Board is the ultimate combo board. The
touch panel controller provides analog resistive touch panels for 4 wire models. It
communicates with a PC system directly through USB and RS-232 connectors. The
touch panel driver emulates mouse left and right button functions.
5.2 Specifications
Electrical Features
 +5 Vdc/ 100 mA typical, 50mV peak to peak maximum ripple and noise
 Bi-directional RS-232 serial communication and USB 1.1 full speed
 Report rate of RS-232 is 180 points/sec (max.). And, USB is 200 points/sec
(max.)
 Unaffected by environmental EMI
 Panel resistance of 4-wire resistive model is from 50 to 200 ohm (Pin to pin on
same layer)
 Touch resistance under 3K ohm
Serial Interface
 EIA 232E (Serial RS-232)
 No parity, 8 data bits, 1 stop bit, 9600 baud (N, 8, 1, 9600)
 Support Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Windows NT4,
Linux, DOS, QNX
USB Interface
 Conforms to USB Revision 1.1 full speed.
 If the USB is connected to the controller, the controller will communicate over
the USB, and will not communicate over the serial port.
 Support Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Linux, QNX
Touch Resolution
 2,048 x 2,048 resolution
Response Time
 Max. 20 ms
5.3 Environmental Features
Reliability
 MTBF is 200,000 hours
Temperature Ranges
 Operating: -25°C ~ 85°C
 Storage: -25°C ~ 85°C
Relative Humidity