ICR-4461
#
Item/Caption
Type
Description
1
LEDs
—
Status LED indication; see Chapter
2
RST
—
Button to reboot the router or to restore the default
configuration; see Chapter
3
PWR
2-pin
terminal
Power supply socket; see Chapter
4
ETH2
SFP cage
SFP cage socket for modules with speed up to 10 Gbps;
see Chapter
5
ETH1
RJ45
1 Gb Ethernet connection for the second LAN; see Chap-
ter
6
ETH0
RJ45
1 Gb Ethernet switched connection (with four ports) for the
first LAN; see Chapter
7
USB
USB-A
USB 2.0 host port; see Chapter
8
SERIAL & I/O
14-pin
terminal
RS232, RS485, CAN bus, binary input, and binary output
interfaces. See Chapter
for more information, Chap-
ter
for I/O parameters, and Chapter
for serial inter-
face parameters.
9
ANT0, ANT1,
ANT2, ANT3
SMA
female
Cellular module antenna connectors. ANT1 and ANT3
are shared with GNSS. See Chapter
for more infor-
mation, Chapter
for cellular module parameters and
Chapter
for GNSS parameters.
10
WIFI1
RP-SMA
female
Connectors for the WiFi antennas. See Chapter
for
more information and Chapter
for WiFi parameters.
11
Grounding
screw
M3
Pay attention to proper grounding; see Chapter
12
SIM slots
microSD slot
Mini SIM
microSD
Two Mini SIM card slots; see Chapter
for more infor-
mation and Chapter
for cellular module parameters.
MicroSD card slot; see Chapter
13
Wall clips
—
Wall mounting clips, included as standard accessories;
see Chapter
Table 1: Hardware Overview of the Router
6