ICR-2412
3. First Use
3.1
Powering up the Router
The router will start up when a power supply is connected to it. By default, the router will
automatically log on to the default APN of the inserted SIM card. The DHCP server will assign
an addresses to the devices connected through the Ethernet port ETH0.
3.2
Router Configuration
Initial router configuration can be made via a web browser running on your PC. Here you
can perform router monitoring, configuration, and administration. First, connect the PC to
the default LAN interface described in the
Start Guide
application note
. To get the router
interface, enter the
address in a web browser. Please note that usage
of the HTTPS protocol for secure communication over the network is required.
There is just the extbf
root
user account created on the router by default. See the
product
label
on the router for its
default password
. Log in to the web interface by the
root
user and
his password. If logged in successfully, the user will have access to the router web interface,
see Figure
. See the configuration manual
of the router for a detailed description and
examples of the router configuration.
After logging on to the device for the first time, we strongly recommend changing the
default password due to security reasons.
For security reasons, we highly recommend updating the router’s firmware to the latest
version regularly. Downgrading the firmware to an older version than the production
version or uploading firmware intended for a different device may cause the device’s
malfunction.
All routers have the
WebAccess/DMP
client pre-installed by default. The activated client
periodically uploads router identifiers, configuration, and cellular network statistics to the
WebAccess/DMP
server. See the configuration manual
, chapter
Basic Information ->
WebAccess/DMP Configuration
, for more information.
21
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www
.lucom.de
