UNO-2050E User Manual
24
Chapter 3 Initial Setup
3.1 Insert CompactFlash Card
The procedure for installing a CompactFlash card into the
UNO-2050E is as follows, please follows these steps carefully.
Step 1:
Remove power cord.
Step 2:
Unscrew four screws from the rear panel of the UNO-2050E.
Step 3:
Remove the rear panel.
Step 4:
Plug a CompactFlash card with user’s OS and application
program into a CompactFlash card slot on board.
Step 5:
Screw back the rear panel with four screws.
3.2 Chassis Grounding
The UNO-2050E housing is aluminum material that provides good EMI
protection and a stable system grounding base. Users can select if con-
necting power grounding with chassis grounding with an onboard jumper
selection.
Figure 3.1: Chassis Grounding Connection
UNO-2050E has onboard jumper JP2 to select if connecting chassis
ground with system's power ground.
Connecting chassis ground with system power ground: (Default)
Not connecting chassis ground with system power ground:
JP2
JP2
